Entering Asian Characters - Siemens SINUMERIK 840D sl Operating Manual

Figure 2-5
Functions
Dictionaries
The simplified Chinese and traditional Chinese dictionaries that are supplied can be expanded:
● If you enter new phonetic notations, the editor creates a new line. The entered phonetic
notation is broken down into known phonetic notations. Select the associated character for
each component. The compiled characters are displayed in the additional line. Accept the
new word into the dictionary and into the input field by pressing the <Input> key.
● Using any Unicode editor, you can enter new phonetic notations into a text file. These
phonetic notations are imported into the dictionary the next time that the input editor is
started.
2.4.12.2

Entering Asian characters

Precondition
The control has been switched over to Chinese.
Procedure
Editing characters using the Pinyin method
+
Milling
Operating Manual, 05/2017, A5E40868956
Example: Zhuyin input
Pinyin input
Entering Latin letters
Editing the dictionary
1. Open the screen form and position the cursor on the input field.
Press the <Alt +S> keys.
The editor is displayed.
Introduction
2.4 User interface
53