Context Menu; Touch Operation - Siemens SINUMERIK 828D Operating Manual

1.4.9

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
● Copy
● Paste
Program editor
Additional functions are available in the editor
● Undo the last line
● Redo the line that was undone
Up to 10 lines can be undone.
1.4.10

Touch operation

If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Operating area switchover
Channel switchover
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Cut Ctrl+X
Copy Ctrl+C
Paste Ctrl+V
Undo Ctrl+Z
Redo Ctrl+Y
You can display the operating area menu by touching the display symbol for
the active operating area in the status display.
You can switch over to the next channel by touching the channel
display in the status display.
Introduction
1.4 User interface
39