Note
Activate base offsets
The offsets specified here are immediately active.
2.5.4
Displaying and editing settable zero offset
All settable offsets, divided into coarse and fine offsets, are displayed in the "Work Offset -
G54..G599" window.
The currently active work offsets are displayed on a green background.
Rotation, scaling and mirroring are displayed.
Procedure
Note
Activate settable work offsets
The settable work offsets must first be selected in the program before they have an impact.
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "G54...G599" softkey.
The "Work Offset - G54..G599" window is opened.
4.
You can edit the values directly in the table.
Setting up the machine
2.5 Work offsets
53