Basis Installation, Uninstalling Installer; Installing The Client Update - Siemens SINUMERIK 840D Installation Manual

Installing SINUMERIK Integrate
7.1 SINUMERIK Integrate with SINUMERIK Operate
7.1.4

Basis installation, uninstalling Installer

Procedure
1. Press the "Basic Installation" softkey.
2. The "Basic installation: ..." window opens.
The installed version number is displayed under "System status" (the current version is
shown instead of "00.00.00.00.000".)
– Select the "Uninstall" softkey.
3. The following confirmation warning is displayed: "Do you really want to delete the Basic
Installation?".
4. Press the "OK" softkey to remove the package.
The procedure is shown by a progress indicator.
- OR -
Press the "Cancel" softkey to prevent uninstallation.
5. Upon completion of the process, the message "No Basic Installation currently installed".
6. Restart the control system.
7.1.5

Installing the Client Update

An update from the SINUMERIK Integrate Client is only supported as of SINUMERIK Operate
version 4.5.4.
142
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE