Call Of Scripts - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
Table 3-12 Help main menu
Help
Content...
About...
3.3.8.4

Call of scripts

Script call in "Data view" tab > "Normal" tab
To open a script in Diff, right-click the required archive in the list of opened comparisons.
In the context menu, select either "Data processing with scripts" or "Last scripts used".
For read-only access to the archive, the editing mode must not be switched on. Write access
is not possible and is acknowledged with an error.
You cannot start Diff scripts from the "Folder view" tab. The Diff script is executed via Shield.
Figure 3-12 Call of a Diff script in normal mode
Alternative script call in "Data view" tab > "Selective" tab
Call a script via the root folder of the archive with context menu in the "Selective" tab.
66
<F1> Opens the online help for the Script Editor.
In the opened online help, you can navigate to the desired topics of Diff or Expert.
Contains information on the version and copyright.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE