Setting Data; Channel-Specific Setting Data; Signals; Signals To/From Bag - Siemens SINUMERIK 840D sl Function Manual

6.6.2

Setting data

6.6.2.1

Channel-specific setting data

Number Identifier: $SC_
42000 THREAD_START_ANGLE
42100 DRY_RUN_FEED
6.6.3

Signals

6.6.3.1

Signals to/from BAG

The BAG-signals from PLC → NCK and from NCK → PLC are stored in data block 11.
The signals are described in:
References:
/FB1/ Function Manual, Basic Functions; NC/PLC Joint Signals(Z1),
Chapter "BAG, Channel, Program Operation (K1)"
6.6.3.2

Signals to/from Channel

The channel signals from PLC → NCK and from NCK → PLC are stored in data blocks 21,
22, ... for the first, second ... Channel contain.
The signals are described in:
References:
/FB1/ Function Manual, Basic Functions; NC/PLC Joint Signals(Z1),
Chapter "BAG, Channel, Program Operation (K1)"
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Mode Groups, Channels, Axis Replacement (K5)
Description
Start angle for thread
Dry run feedrate
Data lists
503