D.2 Channel-Specific Machine Data - Siemens SINUMERIK 802D sl Programming Manual

04.07
20080
MD number
Default setting:
X, Y, Z, A, B, C, U, V, X11, Y11, ...
Changes effective after Power ON
Data type: STRING
Meaning:
20094
MD number
Default setting: 70
Changes effective after POWER ON
Data type: BYTE
Meaning:
20095
MD number
Default setting: 29
Changes effective after POWER ON
Data type: BYTE
Meaning:
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
AXCONF_CHANAX_NAME_TAB
Channel axis name
Minimum input limit: - -
Protection level: 2/7
In this MD you can set the name of the channel axis.
The channel axis is displayed with this identifier in the WCS. This identifier is also written in
the program.
Generally, the first two or three channel axes are used as geometry axes (see also MD
20050: AXCONF_GEOAX_ASSIGN_TAB). The remaining channel axes are defined as
special axes. SINUMERIK 802D has 5 channel axes.
SPIND_RIGID_TAPPING_M_NR
M number for switchover to controlled spindle mode (Siemens mode)
Minimum input limit: 0
Protection level: 2/7
The machine data is effective in Siemens mode and in external language mode.
This machine data defines the M function number used to switch the spindle to
controlled spindle mode (axis mode). This number is substituted by M70 in Sie-
mens mode and by M29 in external language mode. Only M numbers which
have not already been defined as defaults are allowed. M codes M1, M2, M3,
M4, M5, M30, etc. are not allowed, for example.
EXTERN_RIGID_TAPPING_M_NR
M number for switchover to controlled spindle mode (external language mode)
Minimum input limit: 6
Protection level: 2/7
This machine data defines the M function number used to switch the spindle to
controlled spindle mode (axis mode) in external language mode. This number
can be used in external language mode to substitute M29 with another M func-
tion.
Only M numbers which have not already been defined as defaults are allowed.
M codes M0, M1, M3, M4, M5, M30, M99 etc. are not allowed, for example.
Machine and Setting Data

D.2 Channel-specific machine data

Maximum input limit: - -
Unit: - -
Applies with effect from SW version:
Maximum input limit: 0xFF
Unit: - -
Applies with effect from SW version: 5.2
Maximum input limit: 0xFF
Unit: - -
Applies with effect from SW version:
D-227