Commissioning - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning

4.1 Prerequisites
Data transfer
ShopTurn
software
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
For data transfer you require:
S
Hardware
– Programming device with Windows XP or a PC with Ethernet
– Memory stick, if required (Order No.: 6ES7 648–0DC20–0AA0)
S
Software
– SIMATIC Step 7, version 5.3 or later, SP2 (see SIMATIC catalog for
Order No.)
S
ShopTurn on NCU (HMI embedded)
With the ShopTurn variant on NCU (HMI embedded) the software is already
pre–installed on the CompactFlash Card.
S
ShopTurn for PCU 50.3
The necessary software is located on the "NCU–SysSW and ShopTurn–HMI"
CD–ROM. The procedure for installing the software on PCU and NCK/PLC is
described in the following sections.
Note
The NCU software components are located in file SIEMENSD.RTF
(German)/SIEMENSE.RTF (English).
A compatibility list can be found in file 840D_sl_compatibility_list.xls.
4
4-17