Setting Data For Technological Functions; Programming Variables; Changing A Cycle Call - Siemens SINUMERIK 840D sl Operating Manual

The programming can only be completed after the incorrect value has been corrected.
Faulty parameter values are also monitored with alarms during the cycle runtime.
9.15.3

Setting data for technological functions

Technological functions can be influenced and corrected using machine or setting data.
For additional information, please refer to the following documentation:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
9.15.4

Programming variables

In principle, variables or expressions can also be used in the input fields of the screen forms
instead of specific numeric values. In this way, programs can be created very flexibly.
Input of variables
Please note the following points when using variables:
● Values of variables and expressions are not checked since the values are not known at the
time of programming.
● Variables and expressions cannot be used in fields in which a text is expected (e.g. tool
name).
An exception is the "Engraving" function , in which you can assign the desired text in the
text field via a variable as "Variable text".
● Selection fields generally cannot be programmed with variables.
Examples
VAR_A
VAR_A+2*VAR_B
SIN(VAR_C)
9.15.5

Changing a cycle call

You have called the desired cycle via softkey in the program editor, entered the parameters
and confirmed with "Accept".
Turning
Operating Manual, 05/2017, A5E40868721
Creating a ShopTurn program
9.15 Calling technology functions
267