05.07
Characteristics in the Properties dialog can be changed. Fields for which change
authorization has not been assigned in the parameters cannot be changed,
however.
Note
The parameters can be used to define which fields appear in the dialog. Fields
that have not been parameterized for the properties dialog, therefore, cannot be
changed either.
The standard user interface features the following screens:
Properties - General
Fig. 4-1: NC data properties / tab: General
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
4 NC data management
FBDN1/4-61