Configure The Code Carrier Connection - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.2 Configuring the user interface
See also
For configuring new parameters, see Configure the list parameters (Page 153).
12.2.16

Configure the code carrier connection

Precondition
<IDENTCONNECTIONCONFIGURATION> tag
The entries used for configuring the code carrier connection in the tool list of the user
interface are located in the <IDENTCONNECTIONCONFIGURATION> tag. The code carrier
connection is implemented via TDI Ident Connection.
The following functions in the tool list are available:
180
Software option
You require the "MC Information System TDI Ident Connection" option for this
function.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)