Displaying And Editing Base Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
3.5 Zero offsets
The display of the zero point offsets depends on the settings.
Procedure
3.5.3

Displaying and editing base zero offset

The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Zero offset - Base" window.
Procedure
76
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2 Press the "Work offset" and "Overview" softkeys.
The "Work Offsets - Overview" window opens.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Zero offset" softkey.
3. Press the "Base" softkey.
The "Zero Offset - Base" window is opened.
4. You can edit the values directly in the table.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal