Displaying Superimpositions - Siemens SINUMERIK 840D sl Operating Manual

Procedure
...
6.14

Displaying superimpositions

You can display handwheel axis offsets or programmed superimposed movements in the
"Superimpositions" window.
Input field
Tool
Min
Max
DRF
The selection of values displayed in the "Superimposition" window may differ.
Procedure
...
Milling
Operating Manual, 05/2017, A5E40868956
1. Select the "Machine" operating area.
2. Press the <JOG>, <MDA> or <AUTO> key.
3. Press the "H functions" softkey.
The "Auxiliary Functions" window opens.
4. Press the "H functions" softkey again to hide the window again.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. Select the "Machine" operating area.
2. Press the <AUTO>, <MDI> or <JOG> key.
Meaning
Current superimposition in the tool direction
Minimum value for superimposition in the tool direction
Maximum value for superimposition in the tool direction
Displays the handwheel axis offset
Machining the workpiece
6.14 Displaying superimpositions
215