Connecting Applications With The Sinumerik Control System; Overview - Siemens SINUMERIK 840D Installation Manual

Connecting applications with the SINUMERIK control
system
8.1

Overview

Prerequisite
The following components are already installed on the SINUMERIK controller:
● SINUMERIK Integrate (is available with the "SINUMERIK Operate" operating software)
● Secure communication is set up.
Additional information is provided in chapter: Certificate on the server (Page 111).
● The basic functions are configured.
Additional information is provided in chapter: Configuration using the "Consul" software
(Page 127).
● Manage MyResources is installed on the SINUMERIK controller.
Additional information is provided in chapter: Installing new applications (Page 179).
Procedure with SINUMERIK Operate
To establish a connection from the SINUMERIK controller to the server, perform the following
steps:
1. Start the "SINUMERIK Operate" operating software.
Enable the "SINUMERIK Integrate" softkey on the user interface to start
SINUMERIK Integrate
Additional information is provided in chapter: Activating SINUMERIK Integrate products
(Page 139)
2. Enable the use of SINUMERIK Integrate
Additional information is provided in chapter: Enabling use (Page 140).
3. Configure the proxy and URL addresses
Additional information is provided in chapter: Configuring the URL and proxy (Page 140).
4. To install a current version of SINUMERIK Integrate, proceed as follows:
– Uninstall the basic installation
– Install a client update.
5. Restart the SINUMERIK controller.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
Additional information is provided in chapter: Basis installation, uninstalling Installer
(Page 142)
Additional information is provided in chapter: Installing the Client Update (Page 142).
Under Windows: Additional information is provided in chapter: Client update under
Windows (Page 143).
- OR -
Under Linux: Additional information is provided in chapter: Client update under Linux
(Page 147).
8
175