Kinematic Transformation (M1); Brief Description; Transmit - Siemens SINUMERIK 840D sl Function Manual

Kinematic Transformation (M1)

7.1

Brief description

7.1.1

TRANSMIT

The TRANSMIT function allows the following:
● Face-end machining on turned parts in the turning clamp
● A cartesian coordinate system can be used to program these machining operations.
● The control maps the programmed traversing movements of the Cartesian coordinate
● A tool center offset relative to the turning center is permitted.
● The velocity control makes allowance for the limits defined for the rotations.
● A path in the cartesian coordinate system must not pass through the turning center point
Other system variables
● The tool center point path can pass through the turning center point of the rotary axis.
● The rotary axis does not need to be a modulo axis.
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
– Holes
– Contours
system onto the traversing movements of the real machine axes (standard situation):
– Rotary axis (1)
– Infeed axis perpendicular to axis of rotation (2)
– Longitudinal axis in parallel to axis of rotation (3)
Linear axes (2) and (3) are perpendicular to one another.
(this restriction applies to SW 2 and 3).
7
505