Evaluate A Trace - Siemens SINUMERIK 840D sl Commissioning Manual

18.14.5

Evaluate a trace

18.14.5.1 Setting trace views
In order to permit a precise evaluation of the recorded signals, you have the option to edit
the view as well as the display of the characteristic graphs:
● Selection/legend
● Scale
● Zoom
● Cursors: The cursor display provides functions that allow one, two or both curves to be
Precondition
The "Trace" graphic window is opened and the trace has been recorded.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
– Show legend: In addition to the graphic display, the variable data are displayed as
comment, numbered and in color.
– Make a selection: You define which variables are displayed in the graphic window.
– Specify scaling factors for minimum and maximum X and Y value
– Increasing or decreasing the section
precisely measured.
– Cursor A
– Cursor B
– Both cursors
– Snap to curve: The cursor precisely moves along the curve
– Point mode: Cursor jumps directly to various values.
– High point mode: The cursor jumps from one peak value to the next.
– Low point mode: Cursor jumps to the lowest values.
Service and diagnostics
18.14 Trace
393