Table 4-2: Import File With Header - Siemens Sinumerik 840D sl Function Manual

05.07
An import file can contain more than one import block. Each block must
comprise header data and NC data and can also contain comments.
In this way, all the NC data that needs to be edited can be included in one
import file.

Table 4-2: Import file with header

Import file with separate NC data file
HEADER START
NODENAME
NCDATANAME=Butterfly
DNCDATATYPE=BMP
VERSION=1
TRIALCUTID=0
RELEASEID=1
DEVELNAME=Smith
HEADER END
NC-FILE=Bfly1.bmp
COMMENT START
This is a butterfly
COMMENT END
Note
The import format of the MCIS DNC versions up to DNC V1.0 is still supported
with the appropriate database structure.

Import via links
This involves copying data from a link and then pasting it into DNC (same as
the import function). The general conditions that apply to an import with/without
header data also apply here.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
=Group1/Machine2
DNC Plant/DNC Cell (FBDN1)
4 NC data management
FBDN1/4-69