Operator Panel Fronts; Overview - Siemens SINUMERIK 828D Operating Manual

Introduction

2.2 Operator panel fronts

2.2 Operator panel fronts
2.2.1

Overview

Introduction
The display (screen) and operation (e.g. hardkeys and softkeys) of the SINUMERIK Operate
user interface use the operator panel front.
In this example, the OP 010 operator panel front is used to illustrate the components that are
available for operating the controller and machine tool.
Operator controls and indicators
1
2
3
4
5
26
Alphabetic key group
With the <Shift> key pressed, you activate the special characters on keys with double assign-
ments, and write in the uppercase.
Note: Depending on the particular configuration of your control system, uppercase letters are
always written
Numerical key group
With the <Shift> key pressed, you activate the special characters on keys with double assign-
ments.
Control key group
Hotkey group
Cursor key group
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning