Service and diagnostics
18.7 Logbook
Procedure
Note
Registering the machine identity in EUNA
After completion of the 2nd commissioning, you are prompted to send the machine identity to
the EUNA database via the Internet.
See also
Entering machine-specific information (Page 328)
18.7.3
Making a logbook entry
Using the "New logbook entry" window to make a new entry into the logbook.
Enter your name, company and department and a brief description of the measure taken or a
description of the fault.
Note
If you wish to make line breaks in the "fault diagnostics/measure" field, use the key
combination <ALT> + <INPUT>.
The date and entry number are automatically added.
Sorting the entries
The logbook entries are displayed numbered in the "machine logbook" window.
More recent entries are always added at the top in the display.
338
The machine-specific information data are entered.
2.
Start-up (commission) the machine.
3.
Press the "2nd startup completed" softkey.
The "2.SETUP" entry is displayed in the "Machine logbook" window
together with the time and date.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)