Introduction
2.1
Use and field of application
The SINUMERIK software update tool is used to automatically update SINUMERIK NCUs to
a newer version of the CNC software.
2.2
Supplementary conditions
Consider the following supplementary conditions before using the SINUMERIK Software
Update Tool:
● The initial state for the update is CNC software version 04.05 or higher.
● For an initial state of the CNC software lower than version 04.05 SP2, you must adapt the
CUST cycles manually.
SINUMERIK Software Update Tool
Commissioning Manual, 03/2018, A5E42187770B AA
2
13