Configuration Of The Pg/Pc Interface - Siemens SINUMERIK 840D sl Commissioning Manual

PLC commissioning
5.8 Configuring a network (NetPro) for PG/PC
Procedure:
1. To add a PG/PC, open the S7 project in the SIMATIC Manager.
2. In the menu, select "Extras" → "Configure net" or click the button.
3. Insert the PG/PC with drag&drop under "Stations" from the catalog into the network
configuration.
The inserted "PG/PC" station does not yet contain any interfaces. These are configured in the
next step.
5.8.2

Configuration of the PG/PC interface

Introduction
Under NetPro, configure the interfaces required for commissioning on the PG/PC:
● PROFIBUS
● Industrial Ethernet
● PROFINET
● MPI
96
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA