Keys Of The Operator Panel - Siemens SINUMERIK 840D SL Operating Manual

1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 1-1
References
A more precise description as well as a view of the other operator panel fronts that can be
used may be found in the following reference:
Operator Components and Networking Manual; SINUMERIK 840D sl/840Di sl
1.2.2

Keys of the operator panel

The following keys and key combinations are available for operation of the controller and the
machine tool.
Keys and key combinations
Key
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Status LED: POWER
Status LED: TEMP
(illuminated LEDs indicate increased wear)
Alphabetic key group
Numerical key group
Softkeys
Control key group
Hotkey group
Cursor key group
USB interface
Menu select key
Menu forward button
Machine area button
Menu back key
View of OP 010 operator panel front
Function
<ALARM CANCEL>
Cancels alarms and messages that are marked with this
symbol.
<CHANNEL>
Advances for several channels.
Introduction
1.2 Operator panel fronts
23