Modes Groups And Channels - Siemens SINUMERIK 840D sl Operating Manual

2.3.2

Modes groups and channels

Every channel behaves like an independent NC. A maximum of one part program can be
processed per channel.
● Control with 1channel
● Control with several channels
Example
Control with 4 channels, where machining is carried out in 2 channels and 2 other channels
are used to control the transport of the new workpieces.
Mode group 1 channel 1 (machining)
Channel 2 (transport)
Mode group 2 channel 3 (machining)
Channel 4 (transport)
Mode groups (MGs)
Technologically-related channels can be combined to form a mode group.
Axes and spindles of the same mode group can be controlled by one or more channels.
An operating mode group is in one of "Automatic", "JOG" or "MDI" operating modes, i.e.,
several channels of an operating mode group can never assume different operating modes.
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
One mode group exists.
Channels can be grouped to form several "mode groups."
Setting up the machine
2.3 Modes and mode groups
67