10.7
Activating softkeys the for turning/milling technology
The "Multi-mode actions" option must be set to obtain the appropriate softkeys for the
activated technology, turning or milling.
Configuring softkeys
MD11602 $MN_ASUP_START_MASK, ignore stop conditions for ASUB
Bit 1
Bit 3
Priority as of which "ASUP_START_MASK" takes effect
MD1160 $MN_ASUP_START_MASK = 1 or 64
10.8
Configuring the simulation and simultaneous recording
Configuring the simulation
Set the turning or milling technology and the corresponding coordinate system in the channel
via the following channel-specific machine data:
Turning technology:
MD52200 $MCS_TECHNOLOGY = 1
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 34 (example)
Milling technology:
MD52200 $MCS_TECHNOLOGY = 2
MD52000 $MCS_DISP_COORDINATE_SYSTEM = 0 (example)
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
Software option
"Multi-mode actions"
Self-starting ASUB
Jogging possible in the ASUB
Customizing the "Machine" operating area
10.7 Activating softkeys the for turning/milling technology
69