Variable Monitors - Measurements And Measurement Series - Siemens SINUMERIK 840Di sl Function Manual

2 Maschine information

2.2 Variable monitors - Measurements and measurement series

Variable monitors
The data of a variable monitor saved with a machine event can be displayed.
Fig. 2-14: Variable monitor data
Function
Open variable monitor
Delete variable monitor data
from the event
2.2 Variable monitors - Measurements and measurement series
2.2.1 Visualization on the Internet PC
Description of functions
The performance and status of a machine and its modules can be analyzed with
measurements and measurement series that have been performed on the
machine. This includes measurement curves generated from the measurements
and characteristics, as well as additional information about the measurement
result. Trend curves can be generated from characteristics in measurement series.
The machine operator can use the measurement results to make an analysis at a
later point, while away from the machine. Status changes can be derived from the
trend curves. Limit values will show whether any maintenance work is necessary at
an early stage.
2-34
Description
You can open the variable monitor and display
the variations with time of all the recorded
monitor data.
You cannot delete individual variable monitor
data from machine events; it is only possible to
delete the entire event entry.
Note:
Deleting individual details from an event
constitutes illegal manipulation of the archived
document.
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
12/2008