Current Block Display - Siemens SINUMERIK 840D sl Operating Manual

2.4.5

Current block display

The window of the current block display shows you the program blocks currently being
executed.
Display of current program
The following information is displayed in the running program:
● The workpiece name or program name is entered in the title row.
● The program block which is just being processed appears colored.
Editing a program directly
In the Reset state, you can edit the current program directly.
See also
Correcting a program (Page 107)
Universal
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
1. Press the <INSERT> key.
2. Place the cursor at the relevant position and edit the program block.
Direct editing is only possible for G code blocks in the NC memory, not
for external execution.
3. Press the <INSERT> key to exit the program and the edit mode again.
Introduction
2.4 Operator interface
41