Machine Events - List View - Siemens SINUMERIK 840D sl Function Manual

03/2013

2.1.2 Machine events - List view

Function description
You can view events for the selected machine in a list under "Machine events" in
the "Machine information" area.
Examples:
•
Events from Control Monitor Services
-
-
-
Events that have been configured by control monitors with the identification
"Without entry in the machine events" do not generate an entry, and their
details cannot be viewed either.
•
Events from condition monitor services
-
-
•
System events
-
-
You can view additional diagnostic information or triggered workflow services
elements for each event, and evaluate it (in some cases graphically):
•
Workflow services elements
-
-
-
•
Diagnostics data
-
-
-
-
-
-
-
-
-
-
To ascertain differences between machine data, NC status data, and data of the
HMI action log, you can compare this data with data of the same type for several
events on the same machine.
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Alarm or PLC events
Fault processing request
Cyclic events (time-based triggers)
Exceeded interval limits of variable monitors
Limit value violation for measurement series / test series
NC/PLC archives created
Service sessions performed
Transmitted notifications (SMS / e-mail)
Generated maintenance jobs
Service cases
Files
HMI action log
Machine data
NC status data
Feedback messages to the PLC
PLC trace
PLC data blocks
PLC monitors
Variable monitors
Archives
2 Machine information
2.1 Machine overview
2-21