04.07
3.4.2
Compressor in ISO dialect mode
The commands COMPON, COMPCURV, COMPCAD are Siemens language com-
mands. They activate a compressor function which links a number of linear blocks
to form a machining section.
If the compressor function is activated in Siemens mode, it can now be used to
compress linear blocks in ISO dialect mode.
The blocks may not contain any commands other than those listed below:
S Block number
S G01, modal or nonmodal
S Axis assignments
S Feedrate
S Comments
If a block contains any other commands (e.g. auxiliary functions, other G codes,
etc.), it will not be compressed.
Values can be assigned with $x for G, axes and feedrate and the Skip function can
also be utilized.
Example: The function will compress these blocks
N5
N10
N15
N20
N25
N30
N35
The function will not compress these blocks
N5
N10
N20
N25
N30
N35
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
G290
COMPON
G291
G01 X100. Y100. F1000
X100 Y100 F$3
X$3 /1 Y100
X100 (axis 1)
G290
COMPON
G291
G01 X100 G17
X100 M22
X100 S200
Movement Control Commands
3.4 Cutting feedrate control
;G17
;Auxiliary function in block
;Spindle speed in block
3-71