Table 4-3: Structure Of The Import File For An Automatic Import - Siemens Sinumerik 840D sl Function Manual

05.07

Table 4-3: Structure of the import file for an automatic import

Line of the import file
x HEADER START
x NCDATANAME=
<program name>
x DNCDATATYPE=
<program type>
1
x ) VERSION=
<version number>
x NODENAME=
<target machine or group>
WORKPIECE=
<workpiece name>
RELEASEID =<0|1>
TRIALCUTID=<0|1>
DEVELNAME=
<name of the program developer>
DEVELDATE=<date of
development>
MODNAME=
<name of the program modifier>
MODDATE= <date of
modification>
ADMINNAME =
<modifier of administrative data>
ADMINDATE =
<date of administrative data
modification>
x HEADER END
2
) ATT LINK=
<path name \ file name>
2
) ATT COPY=
<path name \ file name>
2
) ATT MOVE=
<path name \ file name>
3
x ) NC FILE=
<path name \ file name>
3
x ) NC START
3
x ) %1234
N0010
...
M30
3
x ) NC END
COMMENT START
Comment line 1
Comment line 2
COMMENT END
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
Description
Identifier: Start block with administrative data
40 characters,
illegal characters: &\"`´*+,/:;<=>?[]\|!,(){}%$ߧμ³
3 characters,
only types know in DNC are permitted
Range of values: 1...999999
40 characters,
only machine name or complete path
40 characters
only required when the NC program is to be stored
in the workpiece
Release ID value 0 or 1 (1 = released)
Trial cut ID value 0 or 1 (1 = trial cut ID)
Max. 32 characters
Date in ISO format
Max. 32 characters
Date in ISO format
Max. 32 characters
Date in ISO format
Identifier: End block with administrative data
Attachments to the NC file (pure information files):
A link to the specified file is created in the
DNC data management.
The specified file is copied to the DNC data
management.
The specified file is moved to the DNC data
management, i.e. the source file is deleted.
If no path is specified, the NC file must be in
the same directory as the import file
Identifier: Start block with NC program
Complete NC program
Identifier: End block with NC program
Identifier: Start block with comments
The entire block must be completely available
or completely omitted
Identifier: End block with comments
DNC Plant/DNC Cell (FBDN1)
4 NC data management
FBDN1/4-71