General
1.12 Overview of measuring cycle functions for milling technology
1.12.8
Workpiece measurement: Setting-up a corner
Using the CYCLE961 cycle, it is possible to determine the position of a workpiece corner
(inner or outer) and use this as zero offset.
Measuring a corner by specifying clearances and angles
Result:
● Actual position of the corner with angle
● Zero offset, rotation
Measuring a corner, specifying 4 points
Result:
● Actual position of the corner with angle
● Zero offset, rotation
54
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles