Specifically Jump To The Program Block - Siemens SINUMERIK 840D sl Operating Manual

Milling
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Preconditions
● The required program is opened in the mold making view.
● The "Graphic" softkey is active.
Procedure
6.15.4

Specifically jump to the program block

If you notice anything peculiar in the graphic or identify an error, then from this location, you
can directly jump to the program block involved where you can edit the program.
Milling
Operating Manual, 05/2017, A5E40868956
1.
Press the softkey "Hide G1/G2/G3" if you want to conceal the machining
paths.
- OR -
2.
Press the softkey "Hide G0" if you want to deactivate the approach and
retraction paths.
- OR -
Press softkey "Hide points" to conceal all the points in the graphic.
Note:
You have the option of simultaneously hiding G1/G2/G3 and G0 lines.
In this case softkey "Hide points" is deactivated.
- OR -
Press the softkeys ">>" and "Vectors" to display all orientation vectors.
Note:
This softkey can only be operated if vectors are programmed.
- OR -
Press the softkeys ">>" and "Surface" to calculate the surface area of the
workpiece.
- OR -
Press the softkeys ">>" and "Curvature".
The "Curvature" input window opens.
Enter the desired minimum and maximum value and press "OK" to con‐
firm the entry and to highlight the curvature changes in color.
Machining the workpiece
6.15 Mold making view
221

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents