Integrating ePS software
You can use the software from ePS Network Services on the user interface.
Procedure
1. Copy the "systemconfiguration.ini" file to the
2. Insert the file in the /Add_on/sinumerik/hmi/cfg directory.
3. Restart the HMI sl.
Information on the ePS software can be found in the following documentation:
References
ePS Function Manual
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
/Siemens/sinumerik/hmi/appl/systemconfig/eps/ directory.
If the "systemconfiguration.ini" file already exists, copy the entire contents of the original
file and insert these in the already available file.
The softkey for the selection of the ePS software is available in the extended operating
area menu.
17
195