Tm15 Terminal Module; Drive-Cliq Hub Module Dmc20 - Siemens SINUMERIK 840D sl Manual

Spare Parts/Accessories

11.2 TM15 Terminal Module

11.2 TM15 Terminal Module
Properties
The TM15 Terminal Module can be used to implement measuring probe inputs and cam
outputs. In addition, the Terminal Module provides drive-related digital inputs and outputs
with short signal delay times. TM15 is connected by means of DRIVE-CLiQ.
Each of the 24 isolated DI/O can be parameterized channel-by-channel as a digital input
(DI), digital output (DO), measuring input, or output of the output cam.
Additional references
You can find additional information on the TM15 in the SINAMICS S120 manual titled
"Control Units and Additional System Components".
The 50 mm clearances above and below the components must be observed.
11.3

DRIVE-CLiQ Hub Module DMC20

Properties
The DRIVE-CLiQ DMC20 Hub Module is used to implement point-to-point distribution of a
DRIVE-CLiQ line. With the DMC20, an axis grouping can be expanded with 4 DRIVE-CLiQ
sockets for additional subgroups.
The module is especially suitable for applications which require DRIVE-CLiQ link nodes to
be removed in groups, without interrupting the DRIVE-CLiQ link line and therefore the data
exchange.
The 50 mm clearances above and below the components must be observed.
Additional references
You can find further information on the DMC20 in the SINAMICS S120 manual titled "Control
Units and Additional System Components".
96
CAUTION
CAUTION
Manual, 07/2007, 6FC5397-0AP10-2BA0
NCU