Configuring Interfaces - Siemens SINUMERIK 840D sl Commissioning Manual

PLC commissioning
5.2 Creating a SIMATIC S7 project (PROFIBUS)
5.2.3

Configuring interfaces

Introduction
Configure the following interfaces in the STEP 7 project via which you want to access the NCU:
● Integrated PROFIBUS
● PROFIBUS DP, only with machine control panel for PROFIBUS (Page 64)
● Industrial Ethernet
When creating a new project using the catalog, the configuration of the PROFIBUS interface is
called automatically.
PROFIBUS DP operating sequence
1. Left-click to select an NCU and while holding down the mouse button drag it to the "Station
design" station window.
2. After you release the mouse button, configure the properties of the PROFIBUS DP interface
for socket X126 (machine control panel) in the dialog box.
3. No configuration is necessary for an Ethernet machine control panel: Select "Cancel".
56
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA