Configuring Tool Management; Requirement - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring tool management

9.1

Requirement

To operate HMI sl with tool management and with or without magazine management, the
following MD settings must be made:
MD 18080
MD 20310
MD 17530
MD 28450
The following machine data must also be set for tool management without magazine
management.
MD 19320
Further settings
You can enable further functions on the user interface via the following machine data:
TM_OPTION_MASK
Description:
Assignment:
TM_OPTION_MASK2
Description:
Assignment:
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
$MN_MM_TOOL_MANAGEMENT_MASK = 02H
Bit1 (counted from 0) must be 1.
$MC_TOOL_MANAGEMENT_MASK = 02H
Bit1 (counted from 0) must be 1.
$MN_TOOL_DATA_CHANGE_COUNTER = 0FH
Bit0, Bit1, Bit2 und Bit3 (counted from 0) must be 1.
$MC_MM_TOOL_DATA_CHG_BUFFER_SIZE = 100
For each 1st channel of a TOA.
$ON_TECHNO_FUNCTION_MASK = 2000000, Bit 25 = 1
Tools are not created and identified via the tool name, but via the internal
tool number.
Bit 7
A name is not suggested when creating a tool.
Bit 2
9
65