4.5
Configuration of the screen size (PC systems)
To prevent the configured screens from covering the header of SINUMERIK Operate, for
example, you can reduce the size of the configured screens.
You can change this setting at any screen. The setting is always applied to all screens.
Using drag-and-drop to make the screen or template smaller.
Figure 4-6
Changing the screen size
You can find more information about templates in the information system of the TIA Portal,
section "Visualizing processes > Creating screens > Basics > Working with master copies".
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
4.5 Configuration of the screen size (PC systems)
Device configuration
53