Configuring A Non-Integrated Connection - Siemens sinumerik 840d sl Configuration Manual

Configuring connections

5.3 Configuring a non-integrated connection

5.3 Configuring a non-integrated connection
All available connections are displayed in the "Connections" editor and you can create non-
integrated connections directly in this editor.
The communication driver to be selected depends on the subcomponent:
● PLC: Communication driver "SIMATIC S7-300/400"
● NC: Communication driver "SINUMERIK NC"
Requirement
● You have created a project.
● The HMI device to be configured has been added (SIMATIC Panel or PC system with
WinCC RT Advanced).
66
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014