Modes Of Operation; General Information - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

2.3 Modes of operation

2.3 Modes of operation
2.3.1

General information

You can work in three different operating modes.
"JOG" mode
"JOG" mode is used for the following preparatory actions:
● Reference point approach, i.e. calibration of the position measuring system
● Preparing a machine for executing a program in automatic mode, i.e. measuring tools,
● Traversing axes, e.g. during a program interruption
● Positioning axes
42
4. Press the "+" or "-" key.
The selected axis moves to the reference point and stops. The
...
coordinate of the reference point is displayed.
The axis is marked with
5. Press the "User enable" softkey.
The "User Acknowledge" window opens.
It shows a list of all machine axes with their current position and SI
position.
5. Position the cursor in the "Acknowledgement" field for the axis in
question.
6. Activate the acknowledgement with the "SELECT" key.
The selected axis is marked with an "x" meaning "safely referenced"
in the "Acknowledgement" column.
By pressing the "SELECT" key, you deactivate the
acknowledgement again.
measuring the workpiece and, if necessary, defining the work offsets used in the program
.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal