3.5.4
Configuration of the automatic file identification
Automatic file identification in Diff
An automatic file identification function is integrated in Diff for file comparison. This file
identification function can identify the file type from the file name or the file content and can
select an associated comparison configuration.
You can call the dialog for setting the program options via the menu "Tools > Options".
①
②
③
The dialog to configure the automatic file identification function is equivalent to the dialog for
the comparison configuration and should be used in the same way.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
The automatic selection of the comparison configuration can be activated or deactivated under
the "File comparison" tab.
Further, it can be set as to whether a message should be issued when an automatic comparison
configuration is changed as a result of the file identification.
This button can be used to call the dialog to configure the automatic file identification function.
Create MyConfig - Diff
3.5 File comparison
77