Operating Diagrams - Siemens SINUMERIK Series Function Manual

2 Machine Information
2.2 Variable monitors – time series – measurements and measurement series
The trend curve can be generated from the measuring type-specific characteristics
(characteristic over time) by cyclic repetition of individual measurements. This is
used in particular as a basis for condition-oriented maintenance. For this, meas-
urement series can be generated based on existing individual measurements. This
ensures that the measurement series is based on the same measurement.
How each test is conducted is described in the following Section:
Test series on the machine.
The machine operator can view the measurement results on the operator panel of
the machine and on the PC. Trend curves derived from measurement series can
only be viewed by the operator on the PC.

2.2.2 Operating diagrams

General control elements
Function
Restore diagram
Setting and displaying
markings
2-40
Description
Reduces the diagram so that only the header line is
visible.
Restores the minimized diagram to its standard size.
Magnifies the diagram so that it fills the entire diagram
space.
Closes the diagram
A pair of markings can be set in the diagram. Left-click
to set the first marking. Move the cursor without press-
ing any buttons to position the second marking, and
then left-click. The markings can be reset if you wish.
The markings are deleted by means of the "Delete
markings" function in the "Display" menu.
ePS Network Services, Function Manual (FH) - 03/2012
© Siemens AG 2012 All Rights Reserved
03/2012