Reading-In Set-Up Data - Siemens SINUMERIK 840D sl Operating Manual

Note
Identical names
If a main program as well as an INI file with the same name are in a directory, when selecting
the main program, initially, the INI file is automatically started. In this way, unwanted tool data
can be changed.
14.17.2

Reading-in set-up data

When reading-in, select which of the backed-up data you require:
● Tool data
● Magazine assignment
● Zero points
● Basic zero point
Tool data
Depending on which data you have selected, the system behaves as follows:
● Complete tool list
First, all tool management data are deleted and then the saved data are imported.
● All tool data used in the program
If at least one of the tools to be read in already exists in the tool management system, you
can choose between the following options.
Milling
Operating Manual, 05/2017, A5E40868956
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Select the "Replace all" softkey to import all tool data. Any existing tools
will now be overwritten without a warning prompt.
- OR -
Press the "Do not overwrite" softkey if existing tools must not be over‐
written.
Already existing tools are skipped, without you receiving any queries.
- OR -
Press the "Skip" softkey if already existing tools are not to be overwritten.
For an already existing tool, you receive a query.
Managing programs
14.17 Setup data
723