Importing Gud Tags; Overview - Siemens sinumerik 840d sl Configuration Manual

6.3.3

Importing GUD tags

6.3.3.1

Overview

The user data (GUD) is made available to WinCC on the configuration PC in the following
way: the user data is packed in a user database using the supplied "WinCC import NC user
data" GUD tool and then stored with the corresponding TIA Portal project.
Note
Data consistency between the TIA Portal and SINUMERIK Operate
If you change something in the GUD in SINUMERIK Operate after the import into the TIA
portal, these changes are not automatically synchronized between the systems.
Repeat the import process if you change something in the GUD data in SINUMERIK
Operate.
Note
GUD tags not compatible with libraries
GUD tags are not compatible with libraries and are not stored in a library when you copy a
configuration.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring variables
6.3 Configuring GUD tags
81