Setting up the machine
4.8 Monitoring axis and spindle data
4.8.3.2
Parameters, spindle chuck data
Parameter
Main spindle
ZC1
ZS1
ZE1
XR
ZR
Counter-spindle
ZC3
ZS3
ZE3
XR
ZR
4.8.4
Entering cylinder error compensation (only rotary grinding machine)
The "Cylinder error compensation" function allows you to correct cylinder errors that have
occurred when clamping the workpiece. The maximum compensation value is 1 mm (for 828D)
or 10 mm (for 840D sl).
Machine manufacturer
Please observe the information provided by the machine manufacturer.
100
3.
Enter the desired parameter.
The settings become active immediately.
Description
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Main spindle chuck dimensions (inc)
Main spindle stop dimensions (inc)
Jaw dimension, main spindle (inc) - only for "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Chuck dimension, counter-spindle (inc) - only for a counter-spindle that has been
set-up
Stop dimension, counter-spindle (inc) - only for a counter-spindle that has been set-
up
Jaw dimension, counter-spindle (inc) - only for a counter-spindle that has been set-
up and "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
Software option
In order to use this function, you need the software option: "SINUMERIK Grinding
Advanced".
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Operating Manual, 05/2017, A5E40869190
Grinding