Example: Configuring Magazine Location Types With Names - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.4 Examples
<!-- ************************************************************** -->
<!-- Enter your text ahead of this comment -->
<!-- ************************************************************** -->
</context>
</TS>
12.4.2

Example: Configuring magazine location types with names

12.4.2.1 Adapting the configuration file
The following excerpt shows the contents of the configuration file:
● Milling technology: sltmlistconfig.xml
● Turning technology: sltmturninglistconfig.xml
The file in this example is stored in the "user/sinumerik/hmi/cfg" directory.
This example describes a configuration of the location types in the magazine list.
In this example, the magazine location type and the tool location type are to be displayed as
a toggle field with plain texts.
The assignment of the parameters to the columns of the list is made in the
"LISTCONFIGURATION" area. The magazine location type is displayed in column 10. The
tool location type is displayed in column 11.
The texts to the location types are assigned in the "PLACETYPECONFIGURATION" area.
The number of the location type is the number at the end of the "PLACETYPE" identifier.
A text identifier for a toggle box entry and a text identifier for a tooltip can be stored for each
location type.
192
<lines>2</lines>
</message>
<!-- **** OEM cutting edge parameter 1 tooltip *** -->
<!-- **** Maximum tool width *** -->
<message>
<source>TM_TT_EDGE_USER_1</source>
<translation>maximum width%nof the tool%noverall</translation>
<chars>35</chars>
<lines>2</lines>
</message>
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)