Repeating Positions - Siemens SINUMERIK Series Operating Manual

Display or hide all positions at once
10.1.16

Repeating positions

Function
If you want to approach positions that you have already programmed again, you can do this
quickly with the function "Repeat position".
You must specify the number of the position pattern. The cycle automatically assigns this
number (for ShopMill). You will find this position pattern number in the work plan (program
view) or G-code program after the block number.
Procedure
Parameter Description
LAB (only for G Repeat jump label for position
code)
Position (only for Enter the number of the position pattern
ShopMill)
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
1. Press the "Hide all" softkey to hide all positions.
2. Press the "Show all" softkey to display all positions again.
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Drilling", and "Repeat position" softkeys.
The "Repeat positions" input window opens.
3. After you have entered the label or the position pattern number, e.g. 1,
press the "Accept" softkey. The position pattern you have selected is then
approached again.
Programming technological functions (cycles)
10.1 Drilling
Unit
419