Measurement Logs In Automatic - Siemens SINUMERIK 828D Manual

2.6
44
General information on workpiece production

2.6.2 Measurement logs in AUTOMATIC

As of SW 4.7 SP2, standard logs can be used to save measurement results. Standard logs
display the results from measuring cycles in a clear log structure. The output is possible in text or
tabular format. Contents and structure are predefined.
The call of the control CYCLE150 is always at the start of the program. You can then optionally
create user-defined texts and program the various measuring cycle calls.
In comparison to the standard log in JOG, additional data is captured:
Name of the part program from which the measuring function was called
Workpiece number
Measuring point, measuring variant and time of measurement
Procedure
Select the display and display mode of the measurement result screen
Switch on logging and select the standard log
2
Select the format (TXT, CSV)
Configure whether the log should be recreated after each measurement or the
measurements should be saved consecutively in the same file.
Select the storage location (NC, USB...)
Parameterize the measuring functions and supplement optional user data with
S_PROTTXT[.].
© Siemens AG All rights reserved SINUMERIK, Manual, Mold-Making with 3- to 5-Axis Simultaneous Milling
.
3
.
4
and the name of the log file
6
1
2
3
4
5
6
7
.
1
.
5
.
7