B3: Several operator panels connected to several
NCUs, distributed systems - only 840D sl
2.1
Brief description
2.1
2.1.1
Topology of distributed system configurations
Features
Rotary indexing machines, multi-spindle turning machines and complex NC production
centers all exhibit one or more of the following features:
● More than one NCU due to large number of axes and channels
● Large dimensions and when spatially separated require more operator units (operator
● Modular machine concept, e.g. using distributed control cabinets
Distributed system configuration
The two areas highlighted in the topology display identify two communications functions to
be examined separately in terms of configuration and utilization.
An operator panel generally comprises an OP/TP with a PCU on which the HMI software
runs. If several OPs/TPs are to be connected to a PCU, TCUs are required in addition.
Reference:
Operator Components and Networking Manual
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
panel fronts OP/TP with PCU/TCU, machine control panel MCP, handheld terminal HT8)
2
79