Fundamentals
2.9 Motion commands
Example 2: Turning
Program code
N10 G90 S400 M3
N20 G0 X25 Z5
N30 G1 G94 Z0 F1000
N40 G95 Z-7.5 F0.2
N50 X60 Z-35
N60 Z-50
N70 G0 X62
N80 G0 X80 Z20 M30
2.9.4.2
Switch on/off linear interpolation for rapid traverse movements (RTLION, RTLIOF)
Independently of the default setting (MD20730 $MC_G0_LINEAR_MODE), the interpolation
response for rapid traverse movements can also be set in the part program using the
commands of the G group 55.
Syntax
RTLIOF
...
RTLION
180
Comment
; Absolute dimension input, spindle clockwise
; Approach the starting position
; Tool infeed
; Traversing along a straight line
; Retract tool, end of program
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming