Creating a ShopTurn program
9.3 Program structure
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Figure 9-4
9.3
Program structure
A machining step program is divided into three sub-areas:
● Program header
● Program blocks
● End of program
These sub-areas form a process plan.
Program header
The program header contains parameters that affect the entire program, such as blank
dimensions or retraction planes.
240
Parameter screen with graphic view
Operating Manual, 05/2017, A5E40868721
Turning