Measuring The Tool On Machines With Combined Technologies - Siemens SINUMERIK 840D sl Programming Manual

Parameter
_OVR [11]
_OVR [12]
_OVR [13]
_OVR [14]
_OVR [15]
_OVR [27]
_OVR [28]
_OVR [29]
_OVR [30]
_OVR [100] -
_OVR [199]
_OVR [200] -
_OVR [299]
_OVR [300] -
_OVR [399]
_OVR [400] -
_OVR [499]
_OVI [0]
_OVI [2]
_OVI [3]
_OVI [5]
_OVI [7]
_OVI [8]
_OVI [9]
Only for measure "Length"
1)
Only for measure "Radius"
2)
Only for the "Individually check teeth" function, measure cutting edge length
3)
Only for the "Individually check teeth" function, measure cutting edge radius
4)
3.6.3.8

Measuring the tool on machines with combined technologies

General information
This chapter refers to measuring a tool on milling/turning machines. Turning is set up as the
1st technology and milling as the 2nd technology.
Preconditions:
1. Milling: MD 52200 $MCS_TECHNOLOGY = 2
2. Turning: MD 52201 $MCS_TECHNOLOGY_EXTENSION = 1
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Description
Difference of radius R / difference of radius of the longest cutting
2)
edge
4)
Actual value of length of the shortest cutting edge
Difference of length of the shortest cutting edge
Actual value of radius of the shortest cutting edge
Difference of radius of the shortest cutting edge
Work offset range
Safe area
Permissible dimensional difference
Empirical value
Actual values of the individual radii
Difference of the individual radii
Actual value of the individual lengths
Difference of the individual lengths
D number
Measuring cycle number
Measuring version
Probe number
Number of the empirical value memory
T name
Alarm number
3.6 Measure tool (milling)
3)
3)
4)
4)
4),
4),
3)
3)
Measuring variants
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
-
-
-
-
-
-
-
299